Titanium rods related processing requirements:
1 , the chemical composition of titanium and grade 2 titanium bars shall conform to the provisions of the reinspection when the demand side , allowing the chemical composition of the deviation should bespecified.
2 , thermal processing bar diameter or side length and tolerances shall comply with the provisions of one of the tables .
3, after thermal processing by car ( mill) light bars and cold-rolled, cold drawn rod diameter tolerances shall comply with the provisions of Table II .
4 , by car after thermal processing (grinding ) roundness light bars should not the half of its size tolerance .
5, do not cut length processing state bar of 300-6000mm, annealed state bar does not cut length of 300-2000mm, length or double length should not length the length of the range. Cut length tolerance of +20 mm; medical titanium alloy rod length scale bar should be included in the amount of cuts , the amount of each incision is 5mm, length or double length should be specified in the contract.
Great article, I hope that you will going to post another one.
回复删除Titanium rods/bar
Titanium tube/pipe
Titanium plate/sheets